混流风机的制作工艺主要包括以下几个步骤:1. 原材料准备:根据风机类型和功率大小,准备好所需的铁皮、叶片材料和其他零部件。要求选择质量良好且符合要求的材质,确保能够承受相应的机械强度和工作压力。2. 机翼成型:将备好的机翼铁皮折弯成与叶轮轴线相匹配的形状,并进行拼接处理,保证无缝隙、不漏气。同时对不同厚度部分的适当调整来控制风扇的气动性能。 3. 安放孔加工 :在壳体上按离心式气体压缩机电动机的下部分轴承盖上预留的热套尺寸均匀钻出热套放置孔 。 4 .安装前后端盖: 对角分别压入后端的迷宫密封圈组件,并调节至位置;用螺钉锁固两端前端盖(或电动机主轴上的连接盘)。 5. 电泳漆处理 :为了提高通风设备的防锈能力和美观程度 ,需要对制备表面进行电泳涂装。 6 进行整机调试等后期工作 是整个制作的收尾阶段包括一些细节方面的检查和维护等工作以确保设备正常运行。 以上信息仅供参考,如果您还有疑问可以咨询人士意见和建议!