玻璃钢产品胶衣树脂剥落解决办法:(1)模具表面多抛光几次,使胶衣树脂不会粘附在模具上。 (2)避免使用软的、能渗透胶衣树脂的石蜡。 (3)在铺敷之前保持胶衣表面清洁,否则会使辅层用树脂与胶衣树脂粘结不好。
提高玻璃钢产品的表面质量:胶衣树脂:为提高玻璃钢产品表面质量,产品表面一般需要一层带有颜色的富树脂层。胶衣树脂就是这种材料。胶衣树脂提高了玻璃钢产品的耐老化性,同时为玻璃钢产品提供一个均质的表面,提高了产品的表面质量。一般为保证产品有一个较好的表面质 量,要求胶衣层厚度在0.4?0.6mm。
玻璃钢产品光泽度不高的解决办法:1、模具使用前,要充分抛光处理,上腊或抛光后,模具表面要用干净的纱布,擦去多余的敷层;2、制品充分固化后,才开始脱模;3、模具表面要保持干燥;