带支撑mbr膜平板膜的特点 1、活性污泥浓度高,强化有机物去除效果;2、有效截留个体小、生长慢的硝化菌,氨氮去除率高;3、对微生物和各种致病菌具有**截留作用;4、出水洁净,可直接回用;5、排泥周期长,污泥产率低,减少了污泥的处理费用;6、省去二沉池,节省占地;与传统的处理系统相比,可节省50%的占地面积;7、装配式膜架设计方便灵活,膜组件的拆装与维护非常方便;8、能耗低、清洗简单、运行费用低
mbr膜平板膜增强型聚偏氟乙烯中空纤维帘式膜组件(MBR 膜片)是膜生物反应器(MBR)的膜分离组件,也是膜生物反应器(MBR)的部分。我公司生产的增强型聚偏氟乙烯中空纤维帘式膜组件(MBR 膜片)结构***,性能***,主要由增强型聚偏氟乙烯中空纤维膜、进气管、内曝气管和出水管组成。注意!(1)增强型聚偏氟乙烯中空纤维帘式膜组件(MBR 膜片)上灰色 UPVC 材质DN15*DN25 变径三通为出水口,安装时通过 DN15 活接与集水管相连。注意!(2)增强型聚偏氟乙烯中空纤维帘式膜组件(MBR 膜片)上白色 UPVC 材质DN15*DN25 变径三通为进气口,安装时通过 DN15 活接与内曝气总管相连。
mbr膜平板膜在国内外多个大中型MBR 项目中广泛应用,具有高过滤精度,高强度,产水水质优异,性能稳定等优点,通常中空纤维膜安装在膜架上,通过设计不同类型的膜架,利用膜架的排列和组合,实现膜组件在数量上、排布形式上组合和安装,以满足污水厂产水量和产水效率的要求。帘式中空纤维膜膜架在使用过程中存在以下问题及不足:(1)帘式中空纤维膜膜架一般采用单层膜架结构,其尺寸过长,致使池子尺寸增大,占地面积较大;(2)膜架一般配置单根产水管,膜架曝气不均匀,影响出水质量的问题;(3)采用单层膜架结构,污水经过同一断面时,仅被处理一次,污水处理效率不高。