等温淬火 工件加热后,淬入温度处于该钢种下贝氏体(B下)转变范围的介质中,保温使之完成下贝氏体转变,然后取出空冷,变温曲线如图2中的曲线4。
低温段转入冷却能力较弱的介质可有效减少工件的内应力,降低工件变形和开裂倾向。本工艺的关键是如何控制在水中停留的时间。
根据经验,按工件厚度计算在水中停留的时间,系数为O.2~O.3s/mm,碳素钢取上限,合金钢取下限。这种工艺适用于碳素钢制造的中型零件(直径10~40mm)和低合金钢制造的较大型零件。