1、设备的进场、上排:在各项准备工作完全做好的情况下,再开始组织设备的进场、上排和吊装工作。2、吊装前的准备工作:设备在吊装前,必须做好仔细的检查核实工作。检查设备安装基准标记、方位线标记是否正确;检查设备的吊耳是否符合吊装要求。
在起重作业范围内除信号员外其他人不得进入。 (7)在起重作业时,要避免触电事故,臂杆顶部与线路中心的安全距离为:①6.6kv为3m②66kv为5m③275kv为10m。 (8)若两台吊车共同起吊一货物时,必须有专人统一指挥,两台吊车性能、速度应相同,各自分担的载荷值,应小于一台吊车的额定总起量的80%;其重物的重量不得超过两机起重总和的75%。
(1)回转作业时,不要紧急停转,以防吊物剧烈摆动发生危险。 (2)回转中司机要注意机上是否有人或后边有无障碍危险。 (3)不回转时将回转制动锁住。 3、起重臂伸缩臂杆。