(2)在安装过程中,如发现问题应及时采取措施,处理后再继续起吊。(3)用扒杆吊装大型塔类设备时,多台卷扬机联合操作,必须要求各卷扬机的卷扬速度大致相同,要保证塔体上各吊点受力大致趋于均匀,避免塔体受力不匀而变形。(4)采用回转法或扳倒法吊装塔罐时,塔体底部安装的铰腕必须具有抵抗起吊过程中所产生水平推力的能力,起吊过程中塔体的左右溜绳必须牢靠,塔体回转就位高度时,使其慢慢落入基础,避免发生意外和变形。
轮胎式吊车需带载行走时,道路必须平坦坚实,载荷必须符合原厂规定。重物离地高度不得超过50cm,并拴好拉绳,较慢行驶,严禁长距离带载行驶。
1、完全缩回起重臂,并放在支架上,将吊钩按规定固定好,制动回转台。2、应接规定顺序收回支腿并固定好。 3、将吊车开回停车场位置上。