真空泵 / EJ-SLG
EJ-SLG-LARGE
• 适用于集中应用
• 多个安装选项使安装和定位更容易
• G1/2' 真空端口
• 集成消音qi
• 多重真空连接
• 预装有 VACSW-3N203-G (PNP) 和 VACSW-3M203-G (NPN) 真空开关
• 提供双级和三级 EJ-LARGE 盒(EJ-LP、EJ-HF 和 EJ-HV)
典型应用
• 食品和制药行业的包装机
• 需要低重量和紧凑尺寸的情况(PKM-Delta 机器人)
• 需要高吸气流速的木材工业机器
3-jaw self-centring electric gripper
• Plug & p1ay user friendly gripper.
• No electricity con5umption when gripper is engaged.
• No programming required.
• Gripper retention guaranteed in event of blackout.
• Self Adapting jaws part.
• Long life Brushless motor (Brushless DC).
• Built-in motor driver.
• 24 Vdc Low Voltage Power Supply.
• M8x1, 3 poles standard connection.
• Controllable by PLC as a pneumatic valve.
• Fiber-carbon gear reduction.
• 10 milion cycle maintenance-free.
• T-slot style jaws for heavy loads.
• Weight-dimensi0n5-force best trade off.
• Rotary actuator fitting compatible.
• Optional magnetic sensors.
双钳口非自动校准中心斜口气动夹具 PB系列
• FDA-H1 食品级润滑脂。
• 提供 6 毫米、8 毫米和 12 毫米孔径三种尺寸。
• 位于颚式钳尖部或尾部的传感器。
• 带齿(用于浇口抓持)或者带衬垫(用于软接触)的颚式
钳。
• 铝质或钢质颚式钳
2-jaw n0n-selfcentering angular pneumatic sprue
gripper series PB
• FDA-H1 food-grade grease.
• Three available sizes with piston bore 6mm, 8mm, 12mm.
• Sensor on the tip of the jaw, or on the tail.
• Jaws with teeth (for sprue gripping), or with pads (for soft
contact).
• Jaws in aluminium or steel.
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接(由主模块提供)供电,并触发两个固态继电器的换向:基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出(PNP/2线或NPN)和逻辑(正向或反向)。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
以上信息由专业从事机器人夹具快速切换器的吉玛泰克于2024/5/11 13:02:06发布
转载请注明来源:http://m.tz1288.com/qynews/jmtkzdh-2750951501.html