吸盘/PTFE
VG.PAAT 扁式 PTFE 吸盘,16 - 20 - 30 - 40
• PTFE 吸盘
• 硅氧烷补偿器
• 不锈钢配件
• 适用于zui高 300°C 的高工作温度
• PTFE 不粘在聚合物或热纤维上
• 弹性悬挂允许轴向和角向运动
技术特征
材料 PTFE
颜色 白色
温度范围-20+300 °C
GIMATIC是一家为工业自动化提供气动、电动夹具(尤其是整套EOAT解决方案)的制造商,产品销量多年来在欧洲乃至全i球范围内都很领i先,在夹具制造业拥有世界i领i先水平的技术。Gimatic拥有五大系列、3000多种产品,
真空泵 / EJ-BA
EJ-BA-MEDIUMX2
• 非常适合分散应用
• 吸气流速和压缩空气消耗量之间的比率高
• 可以集成在夹持点附近,质量轻
• G3/8' 真空端口
• 辅助真空端口,用于 G1/8' 系统的可能吹扫或监控
• 提供双级和三级 EJ-MEDIUM 盒(EJ-LP、EJ-HF 和 EJ-HV)
应用示例
典型应用
• 搬运密封件,如玻璃和金属部件 (EJ-HV)
• 包装(装箱机、纸箱包装机)(EJ-HF、EJ-LP)
• 塑料(模塑)
• 自动、
夹具订制
AGG可在机械手和模具间提供精i准的中心。
注塑模具内金属嵌件安放时尤其要注意这一点。
夹具AGG...B 安装在EOAT上,钢管 AGG...C 安装在模具上。
一旦机械手向模具靠近,夹具在压力的作用下逐步向钢管靠近,
并与之接触。
AGG21-B 和 AGG30-B 采用的是双动作安全弹簧,确保在压缩空
气 (NC)缺失时设备的正常运行。
AGG19-B 采用的是单动作复位弹簧(NO)。
Gripper for engagement
The AGG is used to provide a precise centering between the robot
and the mould.
This necessary when metal inserts must be p1aced in the
mould, before the p1astic injection.
The gripper AGG…-B is fitted on the EOAT, while the steel bushing
AGG…-C is fitted on the mould.
Once the robot has approached the mould, the gripper is
pressurized, thus it closes and engages the bushing.
AGG21-B and AGG30-B are double-acting with a safety spring to
keep the gripper engaged even without compressed air (NC).
AGG19-B is single-acting with reset spring (NO).
SB系列传感器接线盒
• 用于EOAT上传感器接线。• 可以转换PNP和NPN信号。• Is/Os可以是拉电流(PNP)、灌电流(NPN)或干触点。• 可以串联多个盒子来控制更多传感器。• 输入信号重复LED,便于排除故障(不适用于SB15)。• 提供应变消除装置和固定至型材的套件。
Connection boxes for series SB sensors• Used for sensor wiring on EOATs.• PNP and NPN signals can be converted.• Is/Os can be current sourcing (PNP), sinking (NPN) or dry contact
Several boxes can be connected in series to control more sensors
Input signal repetition LED for easy troubleshooting (not for SB15).
Provided with strain reliefs and kit for fastening to profles.
以上信息由专业从事机器人抓手公司的吉玛泰克于2024/5/18 13:26:09发布
转载请注明来源:http://m.tz1288.com/qynews/jmtkzdh-2754882342.html