ID 膨胀抓持器系列
• 创新性气动操作手新理念。
• 向下移动 (MFD) 或向上移动 (MFU)。
• 弹性部件可以是硅氧烷或 EPDM。
• 抓手直径为 8 至 85 毫米。
• 可选鼻形锥体用于对中。
• 可选接近磁性传感器。
• 配有几个安装附件。
ID expansion grippers series
• New concept for innovative air hands.
• Downward movement (MFD), or upward movement (MFU).
• The elastic part can be in Silicone or EPDM.
• Grip diameters from 8 to 85 mm.
• Optional nose cones for centering.
• Optional proximity magnetic sensors.
• Several mounting accessories.
3-jaw self-centring electric gripper
• Plug & p1ay user friendly gripper.
• No electricity con5umption when gripper is engaged.
• No programming required.
• Gripper retention guaranteed in event of blackout.
• Self Adapting jaws part.
• Long life Brushless motor (Brushless DC).
• Built-in motor driver.
• 24 Vdc Low Voltage Power Supply.
• M8x1, 3 poles standard connection.
• Controllable by PLC as a pneumatic valve.
• Fiber-carbon gear reduction.
• 10 milion cycle maintenance-free.
• T-slot style jaws for heavy loads.
• Weight-dimensi0n5-force best trade off.
• Rotary actuator fitting compatible.
• Optional magnetic sensors.
SBMM/SBMM-E - 主模块
这始终是通用SBM的第—个模块,作为串联连接的其他模块的电源。
SBMM版本生成两个同时输出,这些输出使用连续从模块的输出状态进行更新(一个作为常开系列从输出,另一个作为常闭系列从输出)。因此,一个传感器盒可以同时识别全部有源和无源执行器的状态(使用标准传感器,需要盒子2)。
SBMM-E版本生成单个输出(作为常开系列从输出)。
主模块输出可通过选择器设置为PNP或NPN,可通过单独的选择器设置相应的PULL-UP和PULL-DOWN电阻器。该模块有两个用于诊断的LED指示灯。当需要从信号的逻辑分离(或逻辑分组)时,它还可以用作通用SBM的中间模块。然而,主模块输出的状态始终与全部后续从模块的信号状态有关,直到SBM或下一个主模块的末尾
可选的推进器
这个配件可安装在TH钳夹上,用推进力F在钳夹打开时保持负载。例如,卡盘夹紧设备时载重。
This accessory can be installed in the TH grippers, to hold thepayload during the gripper release, by a pushing force F.
As an example, when the chuck of a machining equipment isloaded.
以上信息由专业从事小型气动夹爪的吉玛泰克于2024/7/22 12:53:09发布
转载请注明来源:http://m.tz1288.com/qynews/jmtkzdh-2790004999.html
下一条:武汉奠基石来电咨询「多图」