真空泵 / EJ-LINE
EJ-LINE-MEDIUM
• 可以集成在夹持点附近,质量轻
• 可夹式串联设计优化整体尺寸
• 吸气流速没有降低
• 灵活,能够使用串联或弯式接头
• 响应时间快,能源效率i高
• G1/4' 真空端口
• 提供双级 EJ-MEDIUM 盒(EJ-LP, EJ-HF, EJ-HV)
有关不同压力下的吸气流速和空气消耗量的技术规格,请参阅双级和三级版本的 EJ-MEDIUM 盒筒的技术数据表
典型应用
• 塑料成型自动化设备
• 金属片或金属板搬运(激光切割、弯曲和冲孔机器)
• 拾取和放置(贴标机)
夹具订制
AGG可在机械手和模具间提供精i准的中心。
注塑模具内金属嵌件安放时尤其要注意这一点。
夹具AGG...B 安装在EOAT上,钢管 AGG...C 安装在模具上。
一旦机械手向模具靠近,夹具在压力的作用下逐步向钢管靠近,
并与之接触。
AGG21-B 和 AGG30-B 采用的是双动作安全弹簧,确保在压缩空
气 (NC)缺失时设备的正常运行。
AGG19-B 采用的是单动作复位弹簧(NO)。
Gripper for engagement
The AGG is used to provide a precise centering between the robot
and the mould.
This necessary when metal inserts must be p1aced in the
mould, before the p1astic injection.
The gripper AGG…-B is fitted on the EOAT, while the steel bushing
AGG…-C is fitted on the mould.
Once the robot has approached the mould, the gripper is
pressurized, thus it closes and engages the bushing.
AGG21-B and AGG30-B are double-acting with a safety spring to
keep the gripper engaged even without compressed air (NC).
AGG19-B is single-acting with reset spring (NO).
双钳口自动校准中心的斜口气动夹具,DD系列• 传感器位于后部位置以及抓持区域占用空间更小的新理念。
• 可选磁性传感器 (1)。
• 只有在抓持物品时,传感器才打开。
• 带有弹簧开口的单动式驱动器。
• 高抓持力。
• 配有几个安装附件 (2)。
• 钢质颚式钳。
• FDA-H1 食品级润滑脂。
• 防止进入微小异物 (3)。
• 重型末端行程。
2-jaw self-centering angular pneumatic sprue
gripper, series DD
• New concept with retracted sensor and smaller dimensi0ns in
the grip area.
• Optional magnetic sensors (1).
• The sensor is ON only when something is gripped.
• Single acting with spring opening.
• Very high closing force.
• Several mounting accessories (2).
• Steel jaws.
• FDA-H1 food-grade grease.
• Protection against the entry of small foreign bodies (3).
• Heavy-duty end-strokes.
双钳口自动对准平行i气动钳夹 (PE系列)
• 双动作(PE-25和PE-45可按要求单动作)。
• 高i性能,高可靠性。
• 不同行程的多种选择。
• 在整个行程中,夹紧力是不变的。
• 合金结构实现它的轻重量。
• FDA-H1 食品级润滑脂。
2-jaw parallel self-centering pneumatic gripper
(series PE)
• Double acting (single acting upon request for PE-25...
and PE-45...).
• High efficiency and reliability due to the lack of driving parts.
• Wide choice of stroke length options.
• The gripping force is constant on both directions along total
stroke.
• Light weight; due to its alloy construction.
• FDA-H1 food-grade grease.
以上信息由专业从事旋转夹钳装置的吉玛泰克于2024/5/14 10:24:08发布
转载请注明来源:http://m.tz1288.com/qynews/jmtkzdh-2752450574.html
上一条:合肥酒吧灯信息推荐「安徽天娱」