VG.MB63带防滑夹板的 NBR 材质波纹管吸盘
• 是冲压过程中处理涂油金属板的理想选择
• 平板玻璃和异型玻璃的搬运
• 增加润滑表面摩擦的特殊夹板
• 适用于必须避免材料污染的应用 [PWIS(水性油漆干扰物)]
• NBR 波纹管吸盘,60 肖氏硬度,带硫化接头
• 内部支撑有助于防止薄金属板变形
• 由于唇口宽,适用于处理平坦和轻微弯曲的表面
双钳口自动校准中心的斜口气动夹具,DD系列• 传感器位于后部位置以及抓持区域占用空间更小的新理念。
• 可选磁性传感器 (1)。
• 只有在抓持物品时,传感器才打开。
• 带有弹簧开口的单动式驱动器。
• 高抓持力。
• 配有几个安装附件 (2)。
• 钢质颚式钳。
• FDA-H1 食品级润滑脂。
• 防止进入微小异物 (3)。
• 重型末端行程。
2-jaw self-centering angular pneumatic sprue
gripper, series DD
• New concept with retracted sensor and smaller dimensi0ns in
the grip area.
• Optional magnetic sensors (1).
• The sensor is ON only when something is gripped.
• Single acting with spring opening.
• Very high closing force.
• Several mounting accessories (2).
• Steel jaws.
• FDA-H1 food-grade grease.
• Protection against the entry of small foreign bodies (3).
• Heavy-duty end-strokes.
MGX系列自动对准双钳口平行i气动钳夹
• 平直侧面。
• 坚固导道。
• 高夹紧力。
• 重量轻、尺寸小。
• 高精度尺寸。
• 可带关闭弹簧(-NC)或开启弹簧(-NO)。
• FDA-H1 食品级润滑脂。
2 parallel self-centering pneumatic gripper
series MGX
• Flat profile.
• Robust guide.
• High gripping force.
• Small weight and dimensi0ns.
• High dimensional accuracy.
• Spring closed (-NC) or spring open (-NO) option.
• FDA-H1 food-grade grease.
带端子板的传感器盒
IP66聚苯i乙烯传感器盒。• 可定制的电缆进线和出线,配有标准电缆密封套。• 2个螺钉端子,可直接连接15个输入/输出 。• 随附铝挤压型材直接固定螺钉。• 每个连接线路的zui大开关电流达1A。
IP66 polystyrene sensor box.• Customizable cable input and output with standard cable gland
2 screw terminals with direct connection of 15 inputs/outputs. • Supplied complete with direct fxing screws for aluminum extruded profles.
Maximum switching current up to 1A for each connection line.
以上信息由专业从事机器人抓手的应用的吉玛泰克于2024/5/25 13:45:00发布
转载请注明来源:http://m.tz1288.com/qynews/jmtkzdh-2758815719.html