轧件在冷床冷却过程中由于冷却水不能均匀分布在型钢表面，冷床哪家好，头部冷却速度较快，冷床，弯曲，形成浴盆状，使腹板上的积水不能流出，导致上表面收缩率明显大于型钢下表面，产生上弯。

为消除不均匀变形，首先应该使2辊压下量足够大，满足型钢塑变要求。消除型钢原有变形，达到统一的变形的目的。

Rolling in bed cooling process due to the cooling water can not be uniformly distributed on the surface of steel， the head of the fast cooling rate， the first bend forming tub shaped， make web water can not flow， resulting in the surface shrinkage rate was significantly higher than that of the steel surface， due to bending.

In order to eliminate the uneven deformation， first of all， the 2 roller should be large enough to meet the requirement of the type of steel plastic change. The original deformation of the steel has reached the goal of uniform deformation.

由冷床入口辊道及升降挡板、横移小车、分钢装置、步进齿条冷床、编成组的圆钢，通过横移小车移送到冷床分钢装置，动齿条每步进一个周期，分钢装置就拨一根钢到静齿条上，使成组的圆钢逐根分配到每一个齿内，由于上冷床的圆钢温度很高。

It cists of cooling bed and lifting baffle， roller，冷床设备， steel traversing trolley device， stepping into the steel group， rack cooling bed， transferred to the steel cooling bed device by traversing trolley， moving rack each into a cycle of steel means a steel dial to static rack，圣霖冷床， the circular steel group one by one assigned to each tooth， because of high temperature steel cooling bed.

冷床是中小型棒材车间不可缺少的辅助设备之一。它的功能是将轧机轧制后经飞剪剪切成倍尺长度的棒材， 输送并卸到冷床齿条上冷却， 使其温度由900℃降至100 ～ 300℃。

The cooling bed is one of the auxiliary equipment in the small bar workshop indispensable. It is the function of the bar rolling mill after double length flying shear， conveying and discharging to the cooling bed rack， the temperature 900 DEG C to 100~300 C.

圣霖冷床-圣霖国际(在线咨询)-冷床由鞍山市圣霖进出口贸易有限公司提供。圣霖冷床-圣霖国际(在线咨询)-冷床是鞍山市圣霖进出口贸易有限公司升级推出的，以上图片和信息仅供参考，如了解详情,请您拨打本页面或图片上的联系电话，业务联系人：王秋。