双钳口自动对准平行i气动钳夹 (SX系列)

?双动作 (可按需关闭)。焦作吸具。

?高夹紧力。

?防护等级为IP67。

?列柱向上采用双层O型圈设计。

?适用于恶劣的环境。

?可选的磁传感器。

?FDA-H1 食品级润滑脂

?Double acting (normally closed on request).

?High gripping force.

?Protection class: IP67.

?Double O-Ring sealing on the columns.

?Suitable for harsh environments.

?Optional magnetic sensors.

?FDA-H1 food-grade grease.

传感器

磁性传感器(可选) 通过活塞上的一个磁铁检测出操作位置。因此，大量的磁性材料和强烈的磁场可能会造成传感问题。海绵吸具。

The operating position is detected by proximity magnetic sensors

(optional) through a magnet p1aced on the piston.

Therefore, avoid using the gripper in the vicinity of intense

magnetic ffelds or near a large mass of ferromagnetic material

as this may cause detection errors.

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。吸具原理。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。吸具机械。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.

焦作吸具-吸具机械-吉玛泰克(推荐商家)由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司坚持“以人为本”的企业理念，拥有一支高素质的员工队伍，力求提供更好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。吉玛泰克——您可信赖的朋友，公司地址：江苏省常熟市古里镇通华路1号2幢，联系人：吴琦。