? 传感器位于后部位置以及抓持区域占用空间更小的新理念。
? 可选磁性传感器 (1)。
? 只有在抓持物品时，保定夹爪，传感器才打开。
? 带有弹簧开口的单动式驱动器。
? 高抓持力。
? 配有几个安装附件 (2)。
? 钢质颚式钳。
? FDA-H1 食品级润滑脂。
? 防止进入微小异物 (3)。
? 重型末端行程。
2-jaw self-centering angular pneumatic sprue
gripper， series DD
? New concept with retracted sensor and smaller dimensi0ns in
the grip area.
? Optional magnetic sensors (1).
? The sensor is ON only when something is gripped.
? Single acting with spring opening.
? Very high closing force.
? Several mounting accessories (2).
? Steel jaws.
? FDA-H1 food-grade grease.
? Protection against the entry of small foreign bodies (3).
? Heavy-duty end-strokes.
夹具订制
AGG可在机械手和模具间提供精i准的中心。
注塑模具内金属嵌件安放时尤其要注意这一点。
夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。
一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，
并与之接触。
AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空
气 (NC)缺失时设备的正常运行。
AGG19-B 采用的是单动作复位弹簧(NO)。
Gripper for engagement
The AGG is used to provide a precise centering between the robot
and the mould.
This necessary when metal inserts must be p1aced in the
mould，爪夹制作， before the p1astic injection.
The gripper AGG…-B is fitted on the EOAT， while the steel bushing
AGG…-C is fitted on the mould.
Once the robot has approached the mould，机械夹爪， the gripper is
pressurized， thus it closes and engages the bushing.
AGG21-B and AGG30-B are double-acting with a safety spring to
keep the gripper engaged even without compressed air (NC).
AGG19-B is single-acting with reset spring (NO).
SBMS/SBMS-E - 从模块
每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。
Each individual slave module enables the connection of a singlesensor.
It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.
Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.
保定夹爪-吉玛泰克自动化-气动夹爪由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司是江苏 苏州 ,气动工具的见证者，多年来，公司贯彻执行科学管理、创新发展、诚实守信的方针，满足客户需求。在吉玛泰克领导携全体员工热情欢迎各界人士垂询洽谈，共创吉玛泰克更加美好的未来。