配置和指标

?S1：实现选择输出信号的类型，真空泵大全，PNP（P/2）或NPN（N）。

?S2：分别根据NPN或PNP选择（通过S1）实现选择内部PULLUP（PU）或PULL-DOWN（PD）电阻器。

?L1：通电时为绿色。

?L2：当常闭系列输出切换时为琥珀色（例如：全部触点打开）。

?L3：当切换常开系列时琥珀色（例如：全部触点闭合）。

?S1: enables the selection of the type of output signal，真空泵厂家， PNP(P/2) or NPN (N).

?S2: enables the selection of internal PULL-UP (PU) or PULLDOWN(PD) resistors depending on the NPN or PNP selection(via S1)，真空泵， respectively.

?L1: green when powered.

?L2: amber when the NC series output is switched (e.g. allcontacts open).

?L3: amber when the NO series is switched (e.g. all contactsclosed).

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.

SBMS/SBMS-E - 从模块

每个单独的从模块均可以连接单个传感器。它由内部总线连接（由主模块提供）供电，并触发两个固态继电器的换向：基于传感器输出的常开触点和常闭触点。两个选择器可用于配置传感器信号输出（PNP/2线或NPN）和逻辑（正向或反向）。该模块还有两个用于诊断的LED指示灯。

Each individual slave module enables the connection of a singlesensor.

It is powered from the internal bus connection (provided by themaster module) and triggers the commutation of two solid staterelays: a NO contact and a NC contact based on sensor output.

Two selectors are available to conffgure sensor signal output(PNP/2 wires or NPN) and logic (direct or reverse).The module also has two LED indicators for diagnostics.

真空泵大全-真空泵-苏州吉玛泰克由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司位于江苏省常熟市古里镇通华路1号2幢。在市场经济的浪潮中拼博和发展，目前吉玛泰克在气动工具中享有良好的声誉。吉玛泰克取得全网商盟认证，标志着我们的服务和管理水平达到了一个新的高度。吉玛泰克全体员工愿与各界有识之士共同发展，共创美好未来。