夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，淮北抓持器，夹具在压力的作用下逐步向钢管靠近，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould，气动抓持器， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould， the gripper is

pressurized， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

MGX系列自动对准双钳口平行i气动钳夹

? 平直侧面。

? 坚固导道。

? 高夹紧力。

? 重量轻、尺寸小。

? 高精度尺寸。

? 可带关闭弹簧(-NC)或开启弹簧(-NO)。

? FDA-H1 食品级润滑脂。

2 parallel self-centering pneumatic gripper

series MGX

? Flat profile.

? Robust guide.

? High gripping force.

? Small weight and dimensi0ns.

? High dimensional accuracy.

? Spring closed (-NC) or spring open (-NO) option.

? FDA-H1 food-grade grease.

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.

气动抓持器-淮北抓持器-常熟吉玛泰克自动化(查看)由吉玛泰克自动化工程（常熟）有限公司提供。吉玛泰克自动化工程（常熟）有限公司拥有很好的服务与产品，不断地受到新老用户及业内人士的肯定和信任。我们公司是商盟认证会员，点击页面的商盟客服图标，可以直接与我们客服人员对话，愿我们今后的合作愉快！